PON OLT

Nova X2

Nova X2

A compact two-port XG-PON / XGS-PON OLT with 10GE uplinks, Layer 3 routing and dual power, sized for small ISPs, MDUs, campuses and enterprise sites moving to 10G.

2× XG(S)-PON

2× GE/10GE uplinks

128 Gbps

Layer 3

Dual power

Lumira Nova X2 XGS-PON OLT

Key features

Small footprint, full 10G feature set.

XG-PON and XGS-PON

Each PON port runs XG-PON (10G down, 2.5G up) or XGS-PON (10G symmetric) with N1, N2 or E2-class optics.

Works with any ONU

Standard OMCI with SN / password authentication, optical power monitoring, rogue ONU detection and batch ONU firmware upgrades.

Layer 3 on board

Static routes plus RIP, OSPF, BGP and IS-IS, with 4K VLANs, flexible Q-in-Q and ACL-based QoS.

Built to stay up

Two built-in power supplies, 100–240 V AC and 12 V DC, back each other up, with ONU power-failure alarms.

Resilient uplinks

STP, RSTP and MSTP, ERPS rings, FlexLink and LACP with up to 8 ports per group keep traffic moving.

Secure access

802.1X, RADIUS and TACACS+, port isolation, IP Source Guard and ARP spoofing protection.

Interfaces

What’s on the front panel

Everything you need to light two PON trees and hand traffic upstream, in a 270 mm wide chassis.

2

XG(S)-PON

SFP+ service ports for XG-PON or XGS-PON optics, up to 1:128 split each.

2

GE / 10GE uplink

SFP / SFP+ ports for 1G or 10G uplinks to your aggregation switch.

2

GE RJ45

10/100/1000Base-T copper ports for local equipment or in-band management.

1

MGMT

RJ45 out-of-band management port.

1

Console

RJ45 serial console for setup and debugging.

1

USB

USB port for a flash drive.

Specifications

Technical specifications

Full hardware and software specifications for the Nova X2.

Hardware

PON ports

2× XG(S)-PON, SFP+

Uplink ports

2× GE SFP / 10GE SFP+

Ethernet ports

2× 10/100/1000Base-T

Management

Console (RJ45), MGMT (RJ45), USB

Switching capacity

128 Gbps

Forwarding rate

95.232 Mpps

Memory

256 MB DRAM, 32 MB flash

Packet buffer

12 Mbit

PON

Standards

ITU-T G.987 / G.988

Modes

XG-PON: 9.953 Gbps down / 2.488 Gbps up
XGS-PON: 9.953 Gbps down / 9.953 Gbps up

Split ratio

Up to 1:128 per port

Reach

40 km physical, 100 km logical, 40 km differential

Optics

N1, N2 and E2-class XG-PON / XGS-PON modules, 20-pin SFP+

ONU management

Standard OMCI, works with any brand of ONU; batch ONU software upgrade

ONU authentication

SN, SN + password

Monitoring

ONU optical power monitoring, rogue ONU detection, ONU power-failure alarm

Layer 2

VLAN

4K VLANs; port, MAC and protocol-based VLAN; double-tag VLAN, static and flexible Q-in-Q

MAC

Static MAC, black-hole MAC filtering, per-port MAC limit

Ring protection

STP / RSTP / MSTP, ERPS, loopback detection

Link aggregation

Static and LACP, up to 8 ports per group; FlexLink

Port control

Bidirectional bandwidth control, storm suppression, 9K jumbo frames

Mirroring

Port and flow mirroring

QoS and ACL

Standard and extended ACLs, time-based ACLs, flow classification, rate limiting, 802.1p / DSCP remarking, SP / WRR / SP+WRR scheduling

Layer 3 and management

Routing

Static routes, RIP, OSPF, BGP, IS-IS

Security

802.1X, RADIUS and TACACS+, user levels and password protection, port isolation, IP Source Guard, ARP flood and spoofing protection

Management

CLI, Telnet, Web, SNMP v1/v2/v3, SSH 2.0

Maintenance

FTP / TFTP file transfer, SNTP, LLDP, Ping and Traceroute

Physical and power

Dimensions (W × D × H)

270 × 180 × 40 mm

Weight

≤ 2 kg

Cooling

2 fixed fans

Power supply

Dual built-in, redundant: 100–240 V AC (47/63 Hz) and 12 V DC

Power consumption

≤ 30 W

Operating temperature

−10 to 55 °C

Storage temperature

−40 to 70 °C

Humidity

5–95% RH, non-condensing

Compliance

RoHS

Specifications are subject to change without notice.

Planning a rollout?

Tell us your subscriber counts, sites and timeline — we’ll recommend the right models and put together a quote.