Nova C32
A 2U chassis OLT for large-scale access, with up to 32 GPON, XG-PON or XGS-PON ports across two line-card slots, dual control boards, 100GE uplinks and hot-swap power and fans.
Up to 32 PON
40/100G uplinks
1,280 Gbps
Dual control boards
Hot-swap modules

Key features
Chassis-class access, in 2U.
Mix GPON and 10G
Two line-card slots take 16-port GPON, XG / XGS-PON or combo cards, so you grow capacity and upgrade technology card by card.
Works with any ONU
Standard OMCI with SN / password authentication, optical power monitoring, rogue ONU detection and batch ONU firmware upgrades.
Layer 3 on board
IPv4 / IPv6 VLAN interfaces, static routes, RIP, OSPF and VRRP, with 4K VLANs and flexible Q-in-Q.
Built to stay up
Dual control boards and dual power supplies, with every board, PSU and fan hot-swappable.
100G-ready uplinks
Each control board brings two 40G / 100G QSFP28 ports and four GE / 10GE SFP+ ports, protected by ERPS and LACP.
Secure access
802.1X, RADIUS and TACACS+, DHCP Option 82 and PPPoE+, IP Source Guard, ARP and DoS protection.
What’s on the front panel
A compact chassis: two control boards for uplinks and management, two line-card slots for up to 32 PON ports.
32
PON ports
Two slots for 16-port GPON, XG / XGS-PON or combo line cards, up to 1:128 split per port.
2
40G / 100G uplink
QSFP28 ports per control board for 40G or 100G uplinks to your core.
4
GE / 10GE uplink
SFP / SFP+ ports per control board for 1G or 10G uplinks.
2
Control boards
Active / standby main control boards with hot-swap failover.
1
MGMT
RJ45 out-of-band management port.
1
Console
RJ45 serial console for setup and debugging.
Specifications
Technical specifications
Full hardware and software specifications for the Nova C32.
Hardware
PON ports
Up to 32: 2 line-card slots for 16-port GPON, XG / XGS-PON or combo cards
Uplink ports
Per control board: 4× GE SFP / 10GE SFP+, 2× 40G / 100G QSFP28
Control boards
2 slots, active / standby, hot-swap
Alarm and timing
4× alarm inputs (RJ45), 1PPS + ToD (RJ45)
Management
Console (RJ45), MGMT (RJ45)
Switching capacity
1,280 Gbps
Forwarding rate
952.32 Mpps
Memory
2 GB DRAM, 8 GB flash per board
Packet buffer
—
PON
Standards
ITU-T G.984 / G.987 / G.988
Modes
GPON: 2.5 Gbps down / 1.25 Gbps up
XG-PON: 10 Gbps down / 2.5 Gbps up
XGS-PON: 10 Gbps down / 10 Gbps up
Split ratio
Up to 1:128 per port
Reach
Up to 20 km with standard SFP+ optics
Optics
B+, C+ and C++ GPON; N1, N2 and E2 XG(S)-PON; N1/B+, N2/C+ and E2/D combo modules
ONU management
Standard OMCI, works with any brand of ONU; batch ONU software upgrade
ONU authentication
SN, SN + password
Monitoring
ONU optical power monitoring, rogue ONU detection
Layer 2
VLAN
4K VLANs; port, MAC and protocol-based VLAN; double-tag VLAN, static and flexible Q-in-Q
MAC
128K MAC table; static MAC, black-hole MAC filtering, per-port MAC limit
Ring protection
STP / RSTP / MSTP, ERPS, loopback detection
Link aggregation
Static and LACP, up to 8 ports per group
Port control
Bidirectional bandwidth control, storm suppression, 9K jumbo frames
Mirroring
Port and flow mirroring
QoS and ACL
Standard and extended ACLs, time-based ACLs, flow classification, rate limiting, 802.1p / DSCP remarking, SP / WRR / SP+WRR scheduling
Layer 3 and management
Routing
IPv4 / IPv6 VLAN interfaces, static routes, RIP, OSPF, VRRP
Security
802.1X and MAC authentication, RADIUS and TACACS+, SSH 2.0, SNMPv3, port isolation, IP Source Guard, DHCP Option 82, PPPoE+, ARP and DoS protection
Management
CLI, Telnet, SSH 2.0, Web, SNMP v1/v2/v3, RMON
Maintenance
FTP / TFTP, SNTP, LLDP, 802.3ah Ethernet OAM, Syslog, Ping and Traceroute
Physical and power
Dimensions (W × D × H)
482.6 × 270 × 88.9 mm (2U, 19-inch)
Weight
12 kg
Cooling
Hot-swap fan module
Power supply
Modular, hot-swap: AC + DC or DC + DC; 100–240 V AC, 36–75 V DC
Power consumption
280 W
Operating temperature
−10 to 55 °C
Storage temperature
−40 to 70 °C
Humidity
5–95% RH, non-condensing
Compliance
RoHS
Specifications are subject to change without notice.
XGS-PON OLT series
Other XGS-PON OLTs
Need more PON ports or combo GPON / XGS-PON? The rest of the series runs the same software, so you can mix models across sites.

Nova X2
Compact two-port XG-PON / XGS-PON OLT for 10G service.
2× XG(S)-PON + 2× GE/10GE SFP+
2× GE RJ45, 128 Gbps
Dual AC/DC power, ≤ 30 W
View details

Nova C8-8X2C
Eight-port 1U combo OLT for GPON-to-10G upgrades.
8× GPON / XG(S)-PON combo
8× GE/10GE + 2× 40/100G uplinks
720 Gbps, dual pluggable PSUs
View details

Nova C16
Sixteen-port 1U combo OLT for high-density central offices.
16× GPON / XG(S)-PON combo
8× GE/10GE + 2× 40/100G uplinks
880 Gbps, dual pluggable PSUs
View details
Planning a rollout?
Tell us your subscriber counts, sites and timeline — we’ll recommend the right models and put together a quote.